News & Events
Articles
| 1 | 2 | 3 | 4 |
Results 46-53 of 53
CLOSED-LOOP CONTROL IMPROVES DIE-CASTING PERFORMANCE
1 October 2000Published article on Techmire Ltd.'s application of Moog's closed loop system for die-casting.
As appeared in Hydraulics & Pneumatics, October 2000.
CLOSED-LOOP MOTION CONTROL MACHINE CONTROL TECHNOLOGIES: IMPROVING CONTROL OF THE EXTRUSION BLOW-MOLDING PROCESS
1 March 2000Article on the complexities of extrusion blow-molding and Moog products for improving performance.
Copyright March 2000 Moog Inc.
STIMSON LUMBER SWITCHES TO MOOG VALVES TO ELIMINATE FREQUENT FAILURES
31 December 1998Article on application of Moog's D660 Series ServoJet servo-proportional valves at Stimson Lumber Company.
Copyright 1998 by Moog Inc.
Stimson Lumber Switches to Moog Valves to Eliminate Frequent Failures [PDF]
PAPER MILL ACHIEVES ZERO VALVE FAILURE RATE OVER 12-YEAR PERIOD
31 December 1998Article on the value of clean-filtration systems at paper mills.
Copyright 1998 by Moog Inc.
Paper Mill Achieves Zero Valve Failure Rate Over 12-Year Period [PDF]
SENECA SYSTEMS' VALVE APPLICATIONS PROVIDE EFFICIENCY, HIGHER SPEEDS
1 October 1998Published article on Seneca Systems' application of Moog's D660 Series Servo-Proportional Valves on its new log merchandiser and position devices.
As appeared in Timber Processing, October 1998.
Seneca Systems' Valve Applications Provide Efficiency, Higher Speeds [PDF]
LINEAR-FORCE MOTORS ENHANCE PROPORTIONAL VALVES
1 July 1998Published article on Moog's linear force motors in direct drive servo-proportional valves provide numerous benefits over traditional solenoids.
As appeared in Hydraulics & Pneumatics, July 1998.
FILTRATION FOCUS FIXES FAULTS
1 June 1998Published article on the benefits of improved filtration system for reducing hydraulic equipment breakdowns at Nissan Motors of Japan.
As appeared in Hydraulics and Pneumatics, June 1998
REPAIR FACILITIES
1 November 1997Published letter in Reader's Forum on the cost-savings associated with Moog repairs.
As appeared in Hydraulics & Pneumatics, November 1997
