Training for MSD Servo Drive - Advanced
||March 14 - 15, 2018|
71034 Boeblingen (Germany)
Phone: +49 7031 622 0
This training course is intended for people who know the basics of MSD Servo Drives from the MSD standard training and want to know more about the features of the MSD Servo Drives.
- Basic control techniques
- Field oriented control
- Speed controller
- Position controller
- Exercises: Configuration of MSD Servo Drive
Participation in the standard MSD training or similar knowledge as well as the basics in linear control theory are required.
The content of the standard MSD training is not part of this training.
Please, install in advance the software DriveAdministrator (http://www.moogsoftwaredownload.com/msd.html) and bring your PC to the training. In addition, you should make sure that the LAN address of the PC can be set by the user or that corresponding administrator rights are available.
Please register here for the training. You could also order it at your local Moog sales office or directly at phone (+ 49-7031-622-0) or send an e-mail to email@example.com. Please refer to the order number.
- Maximum number of attendees is 8 and minimum number is 3. The training session will be cancelled if less than attendees register.
- Training fee is 1.118 Euro.
- Cancellation: 10% of the training fee will be charged for cancellations made four weeks or more prior to the start of training; 50% charged if less than 4 weeks prior.
For hotel reservations, please contact firstname.lastname@example.org.