907-HDM2 Specifications

• No. of Channels

  1 or 2

• Format

  HD-SDI (SMPTE-292M) @ 720p, 1080i and 1080p

• Data Rate

  1483 or 1485 Mbps

• Input Buffer

  Adaptive cable EQ and reclocker

• Output Voltage

  800 mVpp nominal

• Impedance

  75 Ohms, input/output

• Modes*

  Dual Video, optimized (default):
  1 x 4:2:2 and 1 x 2:1:1 or 2 x 4:1:1
  with serial/backplane data, no ancillary data
  
  Dual Video, full HD-SDI:
  2 x 4:2:2
  no serial/backplane data, no ancillary data
  
  Single Switched Video, full HD-SDI:
  1 x 4:2:2 (2 inputs)
  with serial/backplane data, with ancillary data

• No. Channels

  4

• Format

  RS-232, RS-485 (selectable)

• Data Rate

  120 kbps NRZ max.

• Optical Fiber

  1 or 2 singlemode (9/125 µm)

• Baud Rate

  2.5 Gbaud (3.125 Gbaud optional)

• Wavelength

  1310/1550 nm standard
  (CWDM optional, 1471 - 1611 nm)

• Flux Budget

  > 20 dB (24 dB typical)

• Power Voltage

  +5 VDC +/-10%, regulated

• Current Draw

  1.3 A typical (2 A max.)

• Power Used

  6.5 W typical (10 W max.)

• Voltage Protection

  Overvoltage and reverse polarity

• Current Protection

  Time delay fuse (3 A)

• Dimensions

  PC/104 (form factor only)

• Weight

  125 g (0.27 lb), including SFP

• Optical

  Dual LC (SFP)

• Video

  Mini-SMB (75 ohm)

• Data (Serial)

  2 x 8-pin Molex (Micro-Fit Series)

• Power

  2-pin Molex, 0.156 inch pin spacing

• Stacking Header

  PC/104 (for stacking 907 cards only)

• Temperature

  -10°C to +60°C (operational)
  -20°C to +85°C (storage)

• Humidity

  85% RH, non-condensing

• Vibration

  5 g, 25-1000 Hz, 3 axes

• Shock

  30 g, 11 ms, half-sine, 3 axes

• LEDS

  Power (electrical), optical link, optical fault, serial Tx/Rx, video status

• Ethernet to PC

  Diagnostics from remote and console through 907-DIAG-E card at console

*Factory configured modes