24 Series Servo Valves
Direct-Operated Flow Control for Analog Signals
The E024 Series Servo Valve was developed from proven Moog aerospace servo valves that are widely used for control surface actuation in civil and military aircraft. This product is ideal for applications where very high levels of power density are required, that can not be achieved with electrical actuation. This valve series is predominantly used in motorsport applications and has also been applied to actuation in autonomous robots, oil and gas exploration and film industry special effects.
- Ultra light-weight 92 gm (3.24 oz)
- Compact package
- High power density
- Low input signal (10 mA)
- Fast response to command inputs
- Excellent energy efficiency
- High peak flow capability
- Precise, repeatable characteristic control
- High temperature and vibration capability
| Specifications | |
|---|---|
| Hydraulic Data | |
| Rated Flow* |
0.3 to 7.5 l/min (0.08 to 2.0 gpm) |
| Standard Configurations | 0.3, 1.0, 1.5, 2.0, 3.8, 5.0, 7.5 l/min (0.08, 0.26, 0.4, 0.53, 1.0, 1.3, 2.0 gpm) |
| Max. Operating Pressure | 210 bar (3,045 psi) |
| Performance Data | |
| 100% Step Response** | 2.5 to 6 ms |
| Frequency Response*** | 200 to 250 Hz |
| Electrical Data | |
| Rated Signal**** | 10 mA |
| Standard Configurations | 10 mA |
| Physical Data | |
| Size (Mounting Pattern) |
Moog Standard |
| Weight | 92 g (3.24 oz) |
| Additional Options | Contact Industrial Application Engineering for additional Flow, Pressure and other options |
* @ ∆p 70 bar (1,000 psi)
** Response at 3,000 psi System Pressure
*** at 90° Phase Lag
**** Single Coil
Contact Us
Literature
Catalogue - Motorsport
Data Sheet - E024 Series Valves
Data Sheet - E024 Valve with LVDT
Data Sheet - E024 Valve with Low Flow Pilot Stage
Case Study - PAS in F1
Article - Control Under Pressure
Typical Applications
- Formula 1 Racing
- Medical
- Oil & Gas Exploration
- Film Industry Special Effects
- Autonomous Robots
FIA PRODUCT HOMOLOGATION
All Moog electro-hydraulic products used in Formula 1 are homologated by the FIA, this indicates they are approved for use with the mandated Formula 1 Electronic Control Unit (ECU).