Model 907-DIAG-E


The 907-DIAG-E card provides access to real-time diagnostic information from many of the Moog Focal Model 907 multiplexers, media converters and expansion cards. Typically mounted on top of a console stack, the 907-DIAG-E reads diagnostic values from both console and remote cards polled via the 10/100 Mbps Ethernet port. With programmable and switch configured IP addresses available, multiple diagnostics cards can be connected to the same network. In addition, a 20-pin header may be programmed to drive external LEDs as various status indicators, such as fault conditions, alarms, and optical link parameters.

Diagnostic information is polled from both optical transceivers (SFPs) and cards themselves. Transceiver data includes transmit and receive optical powers, temperature, laser bias current and power voltage. Card specific data includes card identifier, serial number firmware version and port connectivity status.

Diagnostic readings may be accessed by using Focal Graphical User Interface (GUI) software, based on the Microsoft® .NET Framework, or by using a customer’s own software based on the Focal open communications protocol. A .NET library is also available to simplify the development of user GUI software.

The 907-DIAG-E card is a part of Moog Focal’s unified condition monitoring products that have been developed to help users predict maintenance intervals and remotely monitor the condition of their installed equipment.

Contact Our Experts


  • Highest density of high quality video channels available
    in PC/104 size
  • Video-only mode operates on a single wavelength
  • Compatible with 907-DIAG-E diagnostics card and Graphical User Interface (GUI) software
  • Compatible with existing 907 expansion cards and media
  • Interchangeable SFP transceiver


  • Reduces cost and number of cards required for video intensive application
  • Reduces number of wavelengths required in CWDM systems when using video-only mode
  • Simplifies troubleshooting with advanced diagnostics
  • Supports reuse of existing 907 cards and reduced sparing in mixed 907 and 907V systems
  • Supports a wide range of options including CWDM

Typical Applications

  • Remotely Operated Vehicles (ROVs)
  • Pipe inspection robots
  • Bomb disposal robots
  • Video security systems
  • Tether management systems
  • Tactical networks


Model 907-DIAG-E Specifications
No. Copper Ports 1
Data Rates 10/100 Base-T(X)
No. Channels 1 (optional)
Data Rate and Format 9600 Baud, 8-N-1
(1 start bit, 8 data bits, 1 stop bit, no parity, no flow control)
Power Voltage +5.0 VDC ±10%, regulated
Power Current 0.3 A typical (0.5 A max.)
Dimensions PC/104 (form-factor only)
Weight < 80 g (0.17 lb)
External LED Header

1 x 20-pin Samtec (TST Series)
Mating P/N IDSD-10-S-XX.XX

Supports up to 18 external LEDs

Ethernet Connector 1 x RJ-45 (shielded)
Serial (RS-232) 3.5 mm stereo jack (TRS)
Power PC/104 connector
Temperature -10°C to +60°C (operational)
-40°C to +85°C (storage)
Humidity 85% RH, non-condensing
Vibration 5 g, 25 - 1000 Hz, 3 axes
Shock 30 g, 11 ms half sine, 3 axes



Technical Support

Telephone:  +1-902-468-2263