907-DIAG-E
DIAGNOSTICS CARD, ETHERNET

The 907-DIAG-E card provides access to real-time diagnostic information from many of the Moog Focal Model 907 multiplexers, media converters and expansion cards. Typically mounted on top of a console stack, the 907-DIAG-E reads diagnostic values from both console and remote cards polled via the 10/100 Mbps Ethernet port. With programmable and switch configured IP addresses available, multiple diagnostics cards can be connected to the same network. In addition, a 20-pin header may be programmed to drive external LEDs as various status indicators, such as fault conditions, alarms, and optical link parameters.
Diagnostic information is polled from both optical transceivers (SFPs) and cards themselves. Transceiver data includes transmit and receive optical powers, temperature, laser bias current and power voltage. Card specific data includes card identifier, serial number firmware version and port connectivity status.
Diagnostic readings may be accessed by using Focal Graphical User Interface (GUI) software, based on the Microsoft® .NET Framework, or by using a customer’s own software based on the Focal open communications protocol. A .NET library is also available to simplify the development of user GUI software.
The 907-DIAG-E card is a part of Moog Focal’s unified condition monitoring products that have been developed to help users predict maintenance intervals and remotely monitor the condition of their installed equipment.
Features
- Real-time health monitoring of power, optics, video, and data channels via Ethernet
- Access to software configurable features on 907 MUX cards
- Configurable IP address for networked applications
- Sample diagnostic GUI software available for Windows based PC
- Open diagnostic protocol for customer development
- User defined configuration of on-board diagnostic LEDs and header pins
Benefits
- Allows early identification of potential problems, e.g. increasing optical loss
- Provides remote access to diagnostics for technical support and configuration settings
- Allows logging of diagnostics data to establish baseline and historical performance
- Provides access to custom LED configurations for customer control panels
907-DIAG-E Specifications | |
---|---|
No. Copper Ports | 1 |
Data Rates | 10/100 Base-T(X) |
No. Channels | 1 (optional) |
Data Rate and Format | 9600 Baud, 8-N-1 (1 start bit, 8 data bits, 1 stop bit, no parity, no flow control) |
Power Voltage | +5.0 VDC ±10%, regulated |
Power Current | 0.3 A typical (0.5 A max.) |
Dimensions | PC/104 (form-factor only) |
Weight | < 80 g (0.17 lb) |
External LED Header | 1 x 20-pin Samtec (TST Series) Supports up to 18 external LEDs |
Ethernet Connector | 1 x RJ-45 (shielded) |
Serial (RS-232) | 3.5 mm stereo jack (TRS) |
Power | PC/104 connector |
Temperature | -10°C to +60°C (operational) -40°C to +85°C (storage) |
Humidity | 85% RH, non-condensing |
Vibration | 5 g, 25 - 1000 Hz, 3 axes |
Shock | 30 g, 11 ms half sine, 3 axes |
Contact Us
Technical Support
Telephone: +1-902-468-2263
Typical Applications
- Remotely Operated Vehicles (ROVs)
- Pipe inspection robots
- Bomb disposal robots
- Tether management systems
- Tactical networks