RK4288 Miniature Slip Ring
MINIATURE SLIP RING CAPSULE
A slip ring capsule can be used in any electromechanical system that requires unrestrained, occasional or continuous rotation while transferring power and / or data.
Miniature slip ring capsule assemblies economically address both critical space and weight limitations. Each assembly includes the rotor, brush blocks, frame, ball bearings and dust cover.
These slip rings can be configured with spacing between rings of 0.015 inch and brush diameters no larger than a human hair. Existing designs are available or we can custom design slip rings to meet your specific requirement. For more information, contact our slip ring experts.
Features
- Center-to-center adjacent ring spacings as small as 0.015 inch
can be obtained - 95 rings packaged in a self-contained envelope 3.3 inches long and 1.5 inch barrel diameter
- Gold-on-gold sliding contact technology
- Up to 40 rpm operation
- Low noise; as low as 15 milliohm per circuit pair
- Long life; several million total revolutions have been obtained
Benefits
- Precise, tight packaging capabilities for meeting stringent design criteria
- Proprietary plating techniques provide improved reliability, longer life and increased efficiency
- Unique signal handling performance to minimize noise and increase speed
- Other configurations are available from 16 to 80 circuits
- We also manufacture commercial slip rings from 6 to 24 circuits
RK4288 Specifications | |
---|---|
Current Rating | .8 amp per circuit |
Lead Size | 30 AWG |
Dielectric Strength | 500 V (test) |
Insulation Resistance | 1000 Mohms @ 500 VDC |
Circuit Resistance | 0.54 ohms (leads @ 24 inches) |
Starting Torque | 240 gm cm |
Noise | 30 milliohms maximum |
Rotational Speed | 40 rpm maximum |
Lead Length | 24 inches each end |
Contact Us
Typical Applications
- Gimballed pitch, roll and yaw axes of inertial navigation systems
- Unmanned aerial vehicles (UAV)